How Does Central Air-Conditioning Work?

An air conditioner is a home appliance, system, or device designed to remove heat from an area. The cooling is done using a refrigeration sequence. Its purpose, in an automobile or a building is to supply ease during either cold or hot weather.

The condenser and evaporator are two separate components in a central conditioner. The condenser unit is usually located outside the house on a solid block. The evaporator coil is mounted in the plenum or main duct junction above the heating system.

Most are attached to a home's forced-air distribution system. Accordingly, the same blower, motor, and ductwork used for heating are used to share out cool air from the system. When an air conditioner is in use, hot air inside the house flows to the heating system through the duct. It is moved by the blower transversely the cooled evaporator coil in the plenum and is then transported through ducts to cool the house. The distribution system may encounter a problem when you observe that the house doesn't cool but the conditioner works.

Air conditioning is a very important amenity in the house. You may take it for granted if you have it, but wish for it during hot, summer days when you don't. In relatively warm climates, they have turn out to be more standard than the exception. Moreover, they filter and dehumidify air, making it cleaner and comfy.

A central air conditioner works from a central position to distribute conditioned air all over a house. Nothing like a window- or wall-mounted one, intended to cool a small area or single room, it makes use of a central air-handling unit such as a heat pump or a forced-air furnace and ductwork to distribute cooling throughout the complete house.

There are several benefits in having one. It is one of the effective ways to control cool air throughout all the parts of the house. The centralized unit that cools the air also sends it through a direct course which is through the vent that is to be found in the individual rooms. These make less noise in comparison to the other systems. Central units have compressors as the evident part of the unit, which is outside the building or in any such place that makes it as not immediately obvious as possible. As a result, they do not have an effect on the view from your window or obstruct the space. These do not take any extra space in your room and are very suitable to manage. They are more energy-proficient as compared to other systems. Most work in an inverted cycle as well, making it pump hot air during winter instead. Further, central air conditioners also keep your whole house cool as a replacement for cooling one room.

Heating and Cooling Systems - Furnace and Heat Pump Replacement Tips

Sooner or later you will replace your heating and cooling system. Furnace and heat pump air handlers have a useful life of about twenty years. Air conditioning condenser useful life varies between five and fifteen years. The condenser is the outdoor unit. If you need to replace your heating and cooling system, here are some tips to ensure that your system provides safe, energy efficient, and green operation. These tips apply to gas and electric forced-air systems.

Comply with all local building codes and manufacturer's instructions when installing your new equipment. You should obtain a building permit and have the new installation inspected, but this is seldom done. A qualified and licensed contractor should know and comply with local building codes and with manufacturer's instructions.

Install new equipment that has the highest energy efficiency rating that you can afford. The energy savings from a high efficiency system will often save you more over the system's life than the additional cost. Higher efficiency systems qualify as green and add value to your home. They may also qualify for government and utility rebates.

Replace both the furnace or air handler and the condenser, even if the furnace or air handler still works. An air conditioner condenser and evaporator coil (the inside and outside units) are designed to work best as a system. You may not receive the full energy efficiency of the new condenser if it is connected to an old evaporator coil. An improperly matched condenser and evaporator coil may be highly inefficient and result in higher than necessary energy use.

Use mastic to seal all joints. Do not use duct tape. You may use foil tape at joints, but mastic is better. These joints include where: the evaporator coil connects to the air handler, the supply plenum connects to the evaporator coil, the return plenum connects to the air handler, and the air ducts connect to the plenum. Supply and return plenums are rectangular metal boxes where the ducts connect to the air handler. Joints and ducts that leak air can significantly reduce the energy efficiency of your system and increase operating costs.

Connect flexible air ducts to the plenums using both foil tape and plastic straps. Improperly secured flexible air ducts may leak and may work loose from the plenum.

Do not bend a flexible air duct so that it reduces the diameter of the duct. An air duct is like a garden hose. If you kink a garden hose, the water flow is reduced. If you kink a flexible air duct, the air flow is reduced. Reduced air flow can cause the system to work longer to heat and cool your home. Reduced air flow can also cause comfort problems in rooms. Improperly installed flexible ducts are a common problem.

Install an overflow pan or condensate cutoff switch under air handlers with evaporator coils located in attics and anywhere else inside the home where leaking water could cause damage. Extend a ¾ inch diameter pipe from this pan to a visible location outdoors. If you see water coming from this overflow pipe, there is a problem. Call a qualified contractor to locate the problem.

Install a 3/4 inch diameter drain pipe from the evaporator coil to the outside or to a plumbing drain. Slope the pipe down toward the discharge point over its entire run. Insulate this pipe if you live in a warm and humid climate. Water that flows in this pipe is cold and can cause condensation on the pipe's exterior. This condensation can damage materials and provide moisture for mold.

Replace the circuit breakers for the condenser and air handler if the recommended circuit breaker rating for the new equipment is different from that of the old equipment. It is common that new equipment is more energy efficient than the old equipment and needs less power to operate. More energy efficient equipment usually needs a circuit breaker with a smaller rating.

Confirm that the air ducts are the proper size to work with the new system if you are adding air conditioning to a home without air conditioning or if you are changing from one type of system to another. For example, air ducts sized for an old oil-fired furnace may not be properly sized for a high efficiency gas-fired furnace. Improper air duct sizes may affect system energy efficiency and may cause comfort problems.

A new furnace or heat pump can provide many years of safe and energy efficient service when properly installed. By using these tips you can ensure proper installation of your new system.